This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
Support building internal libraries as shared. This reduces
development time by eliminating the need to re-link all
binaries every time non-interface code in the library changes.
Instead, can hack on libxyz, then `make libxyz`, and re-run
monerod.
By default BUILD_SHARED_LIBS is OFF in release build type,
and ON in debug build type, but can be overriden with -D.
It's only blank only if somebody running cmake in MSYS/MinGW (Windows)
manually forgets to add -D ARCH, but when it is blank, without quotes
those lines are invalid cmake syntax.
The split is to make this software more packageable. 'make install'
is used by the package building scripts, and should not be installing
vendored dependencies onto the system.
1c7d3b0 cmake: define ARM var for all ARM arch variants (redfish)
6fe543d cmake: ARM: exclude libunwind in static build (redfish)
397b720 make: remove NO_AES from arm targets (redfish)
57ca3f3 make: make the ARM release targets statically linked (redfish)
43c07a1 readme: editted install/build instructions for clarity (redfish)
a0d4058 Revert "makefile: remove unnecessary ARM-specific targets" (redfish)
c2bc34b Revert "Interpret x86_64 as x86-64 for architecture" (redfish)
c54b9a1 cmake: don't set ARCH from CMAKE_SYSTEM_PROCESSOR (redfish)
This reverts commit 8623492150.
Let's restrict ARCH to values accepted by -march to keep things clear
and consistent. ARCH is -march, with only one exception: a value of
"default" indicates to not pass -march at all.
It is not correct to do so, because ARCH should only take values
supported by the -march argument, with the exception of 'default'
which denotes not passing -march at all.
ARCH defines the target architecture for builds that are intended to be
portable to other machines.
This gets rid of bitmonerod.exe's dependecy on libwindpthreads-1.dll in build
on Windows on x86_64 (via MSYS2 default toolchain). With this patch all DLL
dependencies are on DLLs in c:\windows\system32.
The previous logic that used a COMMON_*_FLAGS intermediate variable
and then re-assigned CMAKE_*_FLAGS before including each subdirectory
was confusing and ugly. This PR is the right way to do it.
This commit is purely refactoring: built binaries unchanged.
By default the flag is enabled whenever libunwind is found on the
system, with the exception of static build on OSX (for which we can't
install the throw hook #932 due to lack of support for --wrap in OSX
ld64 linker).
This is an attempt to fix build with STATIC=ON on OSX (#932):
[ 95%] Linking CXX executable ../../bin/bitmonerod Undefined symbols for
architecture x86_64: "___real___cxa_throw", referenced from:
___wrap___cxa_throw in libcommon.a(stack_trace.cpp.o) ld: symbol(s) not found
for architecture x86_64
This fixes build of tests with STATIC=ON, which failed with:
/tmp/cc8lNtqY.ltrans12.ltrans.o: In function
`boost::exception_detail::clone_impl<boost::exception_detail::error_info_injector<boost::thread_resource_error>
>::rethrow() const [clone .lto_priv.41]':
cc8lNtqY.ltrans12.o:(.text+0x4e): undefined reference to `__wrap___cxa_throw'
The hook is implemented in libcommon, which is not linked into some of the test
binaries. An alternative solution is to link all tests against libcommon,
but that seems worse because it introduces a false dependency (also,
I tried that and for some of the test binaries the linker still failed to
pick up the symol from libcommon, strangely.)
The tests currently issue a warning that
"warning: -fassociative-math disabled; other options take precedence"
The associative math optimization is turned on indirectly by -Ofast.
Apparently, the optimization is forced to be disabled, while compiling
test harnesses generated by Google Test framework.
Unfortunately, there is no -Wno-error=* flag to disable this warning
(see gcc --help=warnings).
An alternative to this patch is to disable the optimization explicitly
with -fno-associative-math, but that seems worse.
Another alternative is to not pass -Ofast for tests build, but we
want the tests to be built with exact same optimization flags as
the code being tested, otherwise the value of the tests is diminished.
Another alternative is to remove -Werror from the entire build, but
it's good to include that flag to preclude people leaving warnings.
A note regarding implementation of not passing -Werror for tests:
I considered filtering out -Werror from CMAKE_{C,CXX}_FLAGS but
that seems to be worse because it's surprizing behavior, to those
reading the code that adds -Werror. It is better to add it for
when it is used and not added otherwise. I also considered relying
on order, adding -Werror after inluding 'tests' subdir, but before
including the other subdirs, but that also seems cryptic to the
reader. So, I settled with the current solution, of explicitly
setting CMAKE_{C,CXX}_FLAGS to different values before including the
respective subdir.
Testing done: compared compiler invocation for non-tests source files
using `make VERBOSE=1` with and without this commit: the only difference
is the position of -Werror. So, this commit doesn't change the binary.
f07f120 cmake: don't try to link with atomic on Apple (redfish)
19349d7 cmake: ARM: clang: make warning non-fatal: inline asm (redfish)
f3e09f3 cmake: link with -latomic for clang (redfish)
f4b35ae cmake: include -ldl via cmake built-in var (redfish)
fa85cd8 common: stack trace: make clang happy with func ptrs (redfish)
4dce26b cmake: do not pass -stdlib=c++ to clang >=3.7 (redfish)
otherwise clang build fails with
../cryptonote_core/libcryptonote_core.a(miner.cpp.o): In function
`std::__atomic_base<unsigned long long>::load(std::memory_order) const':
/usr/bin/../lib/gcc/i686-pc-linux-gnu/6.1.1/../../../../include/c++/6.1.1/bits/atomic_base.h:396:
undefined reference to `__atomic_load_8'
This has no effect on the gcc build.
The one strange thing is that test code like
std::atomic<int> x;
int main() { return x; }
compiles and links without errors with clang, without -latomic. This
alone would suggest that this patch is unnecessary, but that is not the
case. It's not clear exactly why, though. The bitmonero code is
including the same header, but it must be doing something more complex
than in this test code snippet that causes the failure at link time
pasted above. In any case, passing -latomic fixes the problem and
seems safe.
.
This does two things:
1. fixes clang build, which otherwise errors with undefined symbol
'dlsym'.
2. simplifies the cmake script, delegating to cmake to figure
out platform-specific flags for linking against the dl library.
Tested on Linux (Arch) with clang 3.7 and 3.8 i686 and ARM:
if -stdlib=c++ is passed to clang, then the build errors
out with <string>,<iostrea>,etc. headers not found. Simply
not passing the arg fixes the problem.
**NOTE**: not tested on OSX.
Shorten the list of warnings that are reported, but
which are forced to NOT generate an error, via -Wno-error.
Unwhitelist these: strict-aliasing, sign-compare, type-limits
For example, ignoring strict-aliasing warning caused
lots of wasted time diagnosing Issue #847.
We need ARCH, because it needs to be set for ARM7, ARM6 to be
initialized.
Strangely, on different machines (both ARMv7, Arch), ${ARCH}
var is either empty or 'native'. Handle both cases.
The former was a faulty "fix" for gmtime_r not existing on Windows. The latter is needed only for dynamic builds, and is not included with msys2, which ends up fine because Windows is only built static at this time.
DL is empty and unused elsewhere.
The intention at one point may have been to use CMAKE_DL_LIBS, but that
would more likely apply in some situations involving static linking.
This allows the OpenSSL function checks to compile in unbound's CMake
configuration.
Otherwise, the functions SHA256() and EVP_sha512() won't be called from
libunbound as possible algorithms.
They had not been compiling because static OpenSSL libraries were being
used, along with lack of -ldl. The static library preference is
unnecessary for the checks, so use default suffixes ordering for
CMAKE_FIND_LIBRARY_SUFFIXES when building unbound.
Related files:
configure_checks.cmake
external/unbound/validator/val_secalgo.c
secalgo_ds_digest(), setup_key_digest()
Sample use:
BERKELEY_DB=0 make debug
This makes development with BlockchainLMDB easier when virtual methods
have changed and don't match BlockchainBDB.
