- Trezor: support for device address display (subaddress, integrated address)
- Wallet::API support added
- Simplewallet:
- address device [<index>]
- address new <label> // shows address on device also
- integrated_address [device] <payment_id|address> // new optional "device" arg to display also on the device
9bfa4c20 Fix allow any cert mode in wallet rpc when configured over rpc (Lee Clagett)
3544596f Add ssl_options support to monerod's rpc mode. (Lee Clagett)
c9aaccf3 Fix configuration bug; wallet2 --daemon-ssl-allow-any-cert now works. (Lee Clagett)
98fb98f9 wallet_rpc_server: adding missing return on error in set_daemon (moneromooo-monero)
9074c0d8 wallet_rpc_server: return false on error in set_log_categories (moneromooo-monero)
968848a7 wallet_rpc_server: fix crash in validate_address if no wallet is loaded (moneromooo-monero)
If we have fewer outputs available on the chain than what we
require, but the output we're spending already has a ring,
it would loop picking outputs randomly, but never find enough.
Also tune logs for better debugging this kind of thing.
In the case where previously a second unneeded output would be
added to a transaction. This should help *some* of the cases
where outputs are slowly being consolidated, leading to the
whole balance being locked when sending monero.
Loading the same wallet as the currently loaded one would autosave
the current state after loading it, leading to some kind of rollback
effect. We now save before loading to avoid this. If loading fails,
it means the current wallet will be saved (or maybe not, depending
on where the failure occurs: most of the sanity checks occur before
saving). There is a new autosave_current flag to open/restore calls
so the (enabled by default) autosave can be skipped.
c12b43cb wallet: add number of blocks required for the balance to fully unlock (moneromooo-monero)
3f1e9e84 wallet2: set confirmations to 0 for pool txes in proofs (moneromooo-monero)
36c037ec wallet_rpc_server: error out on getting the spend key from a hot wallet (moneromooo-monero)
cd1eaff2 wallet_rpc_server: always fill out subaddr_indices in get_transfers (moneromooo-monero)
An override for the wallet to daemon connection is provided, but not for
other SSL contexts. The intent is to prevent users from supplying a
system CA as the "user" whitelisted certificate, which is less secure
since the key is controlled by a third party.
Currently if a user specifies a ca file or fingerprint to verify peer,
the default behavior is SSL autodetect which allows for mitm downgrade
attacks. It should be investigated whether a manual override should be
allowed - the configuration is likely always invalid.
Specifying SSL certificates for peer verification does an exact match,
making it a not-so-obvious alias for the fingerprints option. This
changes the checks to OpenSSL which loads concatenated certificate(s)
from a single file and does a certificate-authority (chain of trust)
check instead. There is no drop in security - a compromised exact match
fingerprint has the same worse case failure. There is increased security
in allowing separate long-term CA key and short-term SSL server keys.
This also removes loading of the system-default CA files if a custom
CA file or certificate fingerprint is specified.
The setup-background-mining option can be used to select
background mining when a wallet loads. The user will be asked
the first time the wallet is created.
f825055d wallet_rpc_server: error out on getting the spend key from a hot wallet (moneromooo-monero)
67aa4adc wallet_rpc_server: add a set_daemon RPC (moneromooo-monero)
705acbac wallet2: init some variables to default values if loading old wallets (moneromooo-monero)
f82bc29e wallet_rpc_server: always fill out subaddr_indices in get_transfers (moneromooo-monero)
01efdc6a wallet_rpc_server: set confirmations to 0 for pending/pool txes (moneromooo-monero)
7c440915 Add get_tx_proof support, needed for new sanity check (cslashm)
98fdcb2a Add support for V11 protocol with BulletProofV2 and short amount. New scheme key destination contrfol Fix dummy decryption in debug mode (cslashm)
3a981a33 Add application version compatibility check. (cslashm)
These commands let one freeze outputs by key image, so they
do not appear in balance, nor are considered when creating
a transaction, etc
This is helpful when receiving an output from a suspected spy,
who might try to track your other outputs by seeing with what
other outputs it gets spent.
The frozen command may be used without parameters to list all
currently frozen outputs.
- import only key images generated by cold signing process
- wallet_api: trezor methods added
- wallet: button request code added
- const added to methods
- wallet2::get_tx_key_device() tries to decrypt stored tx private keys using the device.
- simplewallet supports get_tx_key and get_tx_proof on hw device using the get_tx_key feature
- live refresh enables refresh with trezor i.e. computing key images on the fly. More convenient and efficient for users.
- device: has_ki_live_refresh added
- a thread is watching whether live refresh is being computed, if not for 30 seconds, it terminates the live refresh process - switches Trezor state
- enables to perform rescan_spent / ki sync with untrusted daemon. Spent check status involves RPC calls which require trusted daemon status as it leaks information. The new call performs soft reset while preserving key images thus a sequence: refresh, ki sync / import, rescan_bc keep_ki will correctly perform spent checking without need for trusted daemon.
- useful to detect spent outputs with untrusted daemon on watch_only / multisig / hw-cold wallets after expensive key image sync.
- cli: rescan_bc keep_ki
It's better to just ignore them, the user does not really need
to know they're here. If the mask is wrong, they'll fail to be
used, and sweeping will fail as it tries to use it.
Reported by Josh Davis.
- return the right output data when offset is not zero
- do not consider import failed if result height is zero
(it can be 0 if unknown)
- select the right tx pubkey when using subaddresses (it's faster,
and we might select the wrong one if we got an output using one
of the additional tx keys)
- account for skipped outputs for spent/unspent balance info
"spent" is arguably wrong, since it will count spent change
multiple times as it goes through receive/spend cycles.
RPC connections now have optional tranparent SSL.
An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.
SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.
Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.
To generate long term certificates:
openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT
/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.
SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
RPC connections now have optional tranparent SSL.
An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.
SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.
Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.
To generate long term certificates:
openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT
/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.
SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
23813c71 blockchain: add --reorg-notify (moneromooo-monero)
f6db59b0 notify: handle arbitrary tags (moneromooo-monero)
ff959216 notify: warn if the spec contains one of '"\ (moneromooo-monero)
13852678 common: set MONERO_DEFAULT_LOG_CATEGORY for notify and spawn (moneromooo-monero)
b6534c40 ringct: remove unused senderPk from ecdhTuple (moneromooo-monero)
7d375981 ringct: the commitment mask is now deterministic (moneromooo-monero)
99d946e6 ringct: encode 8 byte amount, saving 24 bytes per output (moneromooo-monero)
cdc3ccec ringct: save 3 bytes on bulletproof size (moneromooo-monero)
f931e16c add a bulletproof version, new bulletproof type, and rct config (moneromooo-monero)
