15 KiB
| layout | title | title-pre-kick | title-kick | title-post-kick | kick-class | icon | attribution |
|---|---|---|---|---|---|---|---|
| static_page | Wallet RPC documentation | Developer Guide: | Wallet RPC documentation | green-kicks | icon_client | <!-- Icon is based on work by Freepik (http://www.freepik.com) and is licensed under Creative Commons BY 3.0 --> |
Introduction
This is a list of the monero-wallet-cli RPC calls, their inputs and outputs, and examples of each.
All monero-wallet-cli methods use the same JSON RPC interface. For example:
IP=127.0.0.1
PORT=18082
METHOD="make_integrated_address"
PARAMS="{\"payment_id\":\"1234567890123456789012345678900012345678901234567890123456789000\"}"
curl \
-X POST http://$IP:$PORT/json_rpc \
-d '{"jsonrpc":"2.0","id":"0","method":"'$METHOD'","params":'"$PARAMS"'}' \
-H 'Content-Type: application/json'
Note: "atomic units" refer to the smallest fraction of 1 XMR according to the bitmonerod implementation. 1 XMR = 1e12 atomic units.
Index of JSON RPC Methods:
- getbalance
- getaddress
- getheight
- transfer
- transfer_split
- sweep_dust
- store
- get_payments
- get_bulk_payments
- incoming_transfers
- query_key
- make_integrated_address
- split_integrated_address
- stop_wallet
JSON RPC Methods:
getbalance
Return the wallet's balance.
Inputs: None.
Outputs:
- balance - unsigned int; The total balance of the current monero-wallet-cli in session.
- unlocked_balance - unsigned int; Unlocked funds are those funds that are sufficiently deep enough in the Monero blockchain to be considered safe to spend.
Example:
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"getbalance"}' -H 'Content-Type: application/json' { "id": "0", "jsonrpc": "2.0", "result": { "balance": 140000000000, "unlocked_balance": 50000000000 } }
getaddress
Return the wallet's address.
Inputs: None.
Outputs:
- address - string; The 95-character hex address string of the monero-wallet-cli in session.
Example:
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"getaddress"}' -H 'Content-Type: application/json' { "id": "0", "jsonrpc": "2.0", "result": { "address": "427ZuEhNJQRXoyJAeEoBaNW56ScQaLXyyQWgxeRL9KgAUhVzkvfiELZV7fCPBuuB2CGuJiWFQjhnhhwiH1FsHYGQGaDsaBA" } }
getheight
Returns the wallet's current block height.
Inputs: None.
Outputs:
- height - string; The current monero-wallet-cli's blockchain height. If the wallet has been offline for a long time, it may need to catch up with the daemon.
Example:
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"getheight"}' -H 'Content-Type: application/json' { "id": "0", "jsonrpc": "2.0", "result": { "height": 994310 } }
transfer
Send monero to a number of recipients.
Inputs:
-
destinations - array of destinations to receive XMR:
- amount - unsigned int; Amount to send to each destination, in atomic units.
- address - string; Destination public address.
-
fee - unsigned int; Ignored, will be automatically calculated.
-
mixin - unsigned int; Number of outpouts from the blockchain to mix with (0 means no mixing).
-
unlock_time - unsigned int; Number of blocks before the monero can be spent (0 to not add a lock).
-
payment_id - string; (Optional) Random 32-byte/64-character hex string to identify a transaction.
-
get_tx_key - boolean; (Optional) Return the transaction key after sending. Outputs:
-
tx_hash - array of: string
-
tx_key -
Example:
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"transfer","params":{"destinations":[{"amount":10000000000000,"address":"427ZuEhNJQRXoyJAeEoBaNW56ScQaLXyyQWgxeRL9KgAUhVzkvfiELZV7fCPBuuB2CGuJiWFQjhnhhwiH1FsHYGQGaDsaBA"},{"amount":200000000000,"address":"49VtwYXDbbh7hq57wwkLH36x4D6XV6Tr2P93ANnBi9qFGyYZbx8SXWPUHC9V1o7N41b4c3WJ1kubkffRfPTPfMuB8QUqFD5"}],"fee":150000000000,"mixin":3,"unlock_time":0,"payment_id":"001f181e2a2e076e8451e9dd7b5fe8fbd2b204cd6a20cb3e21b9a2a42b0ce03c","get_tx_key":true}}' -H 'Content-Type: application/json' { "id": "0", "jsonrpc": "2.0", "result": { "tx_hash": "<29d933789db5483fa63694ed2560d3829dbf0b945fdea3c42fbfa4d381e7ac22>", "tx_key": "<c228dff7aa455d770f8cf71b9d319d2055a125cfbac1ca9485aeb1a107604d0d>" } }
transfer_split
Same as transfer, but can split into more than one tx if necessary.
Inputs:
- destinations - array of destinations to receive XMR:
- amount - unsigned int; Amount to send to each destination, in atomic units.
- address - string; Destination public address.
- fee - unsigned int; Ignored, will be automatically calculated.
- mixin - unsigned int; Number of outpouts from the blockchain to mix with (0 means no mixing).
- unlock_time - unsigned int; Number of blocks before the monero can be spent (0 to not add a lock).
- payment_id - string; (Optional) Random 32-byte/64-character hex string to identify a transaction.
- get_tx_key - boolean; (Optional) Return the transaction key after sending.
- new_algorithm - boolean; True to use the new transaction construction algorithm, defaults to false.
Outputs:
- tx_hash_list - array of: string
Example:
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"transfer_split","params":{"destinations":[{"amount":2000000000000,"address":"427ZuEhNJQRXoyJAeEoBaNW56ScQaLXyyQWgxeRL9KgAUhVzkvfiELZV7fCPBuuB2CGuJiWFQjhnhhwiH1FsHYGQGaDsaBA"},{"amount":3000000000000,"address":"49VtwYXDbbh7hq57wwkLH36x4D6XV6Tr2P93ANnBi9qFGyYZbx8SXWPUHC9V1o7N41b4c3WJ1kubkffRfPTPfMuB8QUqFD5"}],"mixin":3,"unlock_time":0,"payment_id":"a29602cc261fecbc93c22a152a942cc791ca6112cffe201c3e809945c9da672f","get_tx_key":true,"new_algorithm":true}}' -H 'Content-Type: application/json' { "id": "0", "jsonrpc": "2.0", "result": { "tx_hash_list": ["<fb39c42cb5ff231ee9e8b381bb8734fd655b6ca28a23cbd82aa9422aa870e91b>"] } }
sweep_dust
Send all dust outputs back to the wallet's, to make them easier to spend (and mix).
Inputs: None.
Outputs:
- tx_hash_list - list of: string
Example (In this example, sweep_dust returns an error due to insufficient funds to sweep):
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"sweep_dust"}' -H 'Content-Type: application/json' { "error": { "code": -4, "message": "not enough money" }, "id": "0", "jsonrpc": "2.0" }
store
Save the blockchain.
Inputs: None.
Outputs: None.
Example:
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"store"}' -H 'Content-Type: application/json' { "id": "0", "jsonrpc": "2.0", "result": { } }
get_payments
Get a list of incoming payments using a given payment id.
Inputs:
- payment_id - string
Outputs:
- payments - list of:
- payment_id - string
- tx_hash - string
- amount - unsigned int
- block_height - unsigned int
- unlock_time - unsigned int
Example:
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"get_payments","params":{"payment_id":"4279257e0a20608e25dba8744949c9e1caff4fcdafc7d5362ecf14225f3d9030"}}' -H 'Content-Type: application/json' { "id": "0", "jsonrpc": "2.0", "result": { "payments": [{ "amount": 10350000000000, "block_height": 994327, "payment_id": "4279257e0a20608e25dba8744949c9e1caff4fcdafc7d5362ecf14225f3d9030", "tx_hash": "c391089f5b1b02067acc15294e3629a463412af1f1ed0f354113dd4467e4f6c1", "unlock_time": 0 }] } }
get_bulk_payments
Get a list of incoming payments using a given payment id, or a list of payments ids, from a given height. This method is the preferred method over get_payments because it has the same functionality but is more extendable. Either is fine for looking up transactions by a single payment ID.
Inputs:
- payment_ids - array of: string
- min_block_height - unsigned int; The block height at which to start looking for payments.
Outputs:
- payments - list of:
- payment_id - string
- tx_hash - string
- amount - unsigned int
- block_height - unsigned int
- unlock_time - unsigned int
Example:
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"get_bulk_payments","params":{"payment_ids":["4279257e0a20608e25dba8744949c9e1caff4fcdafc7d5362ecf14225f3d9030"],"min_block_height":990000}}' -H 'Content-Type: application/json' { "id": "0", "jsonrpc": "2.0", "result": { "payments": [{ "amount": 10350000000000, "block_height": 994327, "payment_id": "4279257e0a20608e25dba8744949c9e1caff4fcdafc7d5362ecf14225f3d9030", "tx_hash": "c391089f5b1b02067acc15294e3629a463412af1f1ed0f354113dd4467e4f6c1", "unlock_time": 0 }] } }
incoming_transfers
Return a list of incoming transfers to the wallet.
Inputs:
- transfer_type - string; "all": all the transfers, "available": only transfers which are not yet spent, OR "unavailable": only transfers which are already spent.
Outputs:
- transfers - list of:
- amount - unsigned int
- spent - boolean
- global_index - unsigned int; Mostly internal use, can be ignored by most users.
- tx_hash - string; Several incoming transfers may share the same hash if they were in the same transaction.
- tx_size - unsigned int
Example (Return "all" transaction types):
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"incoming_transfers","params":{"transfer_type":"all"}}' -H 'Content-Type: application/json' { "id": "0", "jsonrpc": "2.0", "result": { "transfers": [{ "amount": 10000000000000, "global_index": 711506, "spent": false, "tx_hash": "<c391089f5b1b02067acc15294e3629a463412af1f1ed0f354113dd4467e4f6c1>", "tx_size": 5870 },{ "amount": 300000000000, "global_index": 794232, "spent": false, "tx_hash": "<c391089f5b1b02067acc15294e3629a463412af1f1ed0f354113dd4467e4f6c1>", "tx_size": 5870 },{ "amount": 50000000000, "global_index": 213659, "spent": false, "tx_hash": "<c391089f5b1b02067acc15294e3629a463412af1f1ed0f354113dd4467e4f6c1>", "tx_size": 5870 }] } }
Example (Return "available" transactions):
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"incoming_transfers","params":{"transfer_type":"available"}}' -H 'Content-Type: application/json' { "id": "0", "jsonrpc": "2.0", "result": { "transfers": [{ "amount": 10000000000000, "global_index": 711506, "spent": false, "tx_hash": "<c391089f5b1b02067acc15294e3629a463412af1f1ed0f354113dd4467e4f6c1>", "tx_size": 5870 },{ "amount": 300000000000, "global_index": 794232, "spent": false, "tx_hash": "<c391089f5b1b02067acc15294e3629a463412af1f1ed0f354113dd4467e4f6c1>", "tx_size": 5870 },{ "amount": 50000000000, "global_index": 213659, "spent": false, "tx_hash": "<c391089f5b1b02067acc15294e3629a463412af1f1ed0f354113dd4467e4f6c1>", "tx_size": 5870 }] } }
Example (Return "unavailable" transaction. Note that this particular example returns 0 unavailable transactions):
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"incoming_transfers","params":{"transfer_type":"unavailable"}}' -H 'Content-Type: application/json' { "id": "0", "jsonrpc": "2.0", "result": { } }
query_key
Return the spend or view private key.
Inputs:
- key_type - string; Which key to retrieve: "mnemonic" - the mnemonic seed (older wallets do not have one) OR "view_key" - the view key
Outputs:
- key - string; The view key will be hex encoded, while the mnemonic will be a string of words.
Example (Query view key):
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"query_key","params":{"key_type":"view_key"}}' -H 'Content-Type: application/json' { "id": "0", "jsonrpc": "2.0", "result": { "key": "7e341d..." } }
Example (Query mnemonic key):
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"query_key","params":{"key_type":"mnemonic"}}' -H 'Content-Type: application/json' { "id": "0", "jsonrpc": "2.0", "result": { "key": "adapt adapt nostril ..." } }
make_integrated_address
Make an integrated address from the wallet address and a payment id.
Inputs:
- payment_id - string; hex encoded; can be empty, in which case a random payment id is generated
Outputs:
- integrated_address - string
Example (Payment ID is empty, use a random ID):
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"make_integrated_address","params":{"payment_id":""}}' -H 'Content-Type: application/json' { "id": "0", "jsonrpc": "2.0", "result": { "integrated_address": "4BpEv3WrufwXoyJAeEoBaNW56ScQaLXyyQWgxeRL9KgAUhVzkvfiELZV7fCPBuuB2CGuJiWFQjhnhhwiH1FsHYGQQ8H2RRJveAtUeiFs6J" } }
split_integrated_address
Retrieve the standard address and payment id corresponding to an integrated address.
Inputs:
- integrated_address - string
Outputs:
- standard_address - string
- payment - string; hex encoded
Example:
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"split_integrated_address","params":{"integrated_address": "4BpEv3WrufwXoyJAeEoBaNW56ScQaLXyyQWgxeRL9KgAUhVzkvfiELZV7fCPBuuB2CGuJiWFQjhnhhwiH1FsHYGQQ8H2RRJveAtUeiFs6J"}}' -H 'Content-Type: application/json' { "id": "0", "jsonrpc": "2.0", "result": { "payment_id": "<420fa29b2d9a49f5>", "standard_address": "427ZuEhNJQRXoyJAeEoBaNW56ScQaLXyyQWgxeRL9KgAUhVzkvfiELZV7fCPBuuB2CGuJiWFQjhnhhwiH1FsHYGQGaDsaBA" } }
stop_wallet
Stops the wallet, storing the current state.
Inputs: None.
Outputs: None.
Example:
{:.cli-code} [ monero->~ ]$ curl -X POST http://127.0.0.1:18082/json_rpc -d '{"jsonrpc":"2.0","id":"0","method":"stop_wallet"}' -H 'Content-Type: application/json' { "id": "0", "jsonrpc": "2.0", "result": { } }